5 Reasons Why Carbon Water Purification Systems Are The Go-to Clean Water Solution For Homes

Carbon water purification systems are your one stop solution for clean water.

Carbon water purification systems offer safest-to-drink water on a budget. 

Clean water is increasingly becoming scarce here in the States. And the majority of Americans already have their tap water contaminated. 

According to some estimates, close to 200 million people across the US have PFAS contaminated water supply. 

To make matters worse, most of these contaminants are tasteless and odorless. So you never know what contaminants are lurking in your water supply. 

You see, most of us get our water from a municipal treatment plant. 

Municipal water is decontaminated, so it is mostly safe to consume. However, chemicals like chlorine are excessively used for decontamination. That means you should avoid drinking municipal water directly. 

Highly chlorinated water poses several health risks. So it’s better to purify your water at the point of entry itself. 

By using carbon filters, a whole house water purification system cleanses your water of all pollutants. 

That means you get the purest water from all faucets of your home. 

Sounds interesting, right? 

There’s more to carbon water purification systems which we shall later. 

What are carbon water purification systems?

A carbon water purifier system is the most commonly used water purification method. 

Almost every water purification system uses some form of carbon filtration. 

So the popular water purifiers that you find in the market use carbon to cleanse water. That includes reverse osmosis filtration systems, whole house water purifiers, and even refrigerator filters. 

Carbon water purification systems depend upon a carbon source. That can be bituminous coal or peat, among others. 

Carbon is activated by heating or steaming to enable decontamination. That opens pores of the carbon filter, increasing its surface area and allowing it to hold contaminants. Thus, carbon filtration offers you pure water free from chemicals and pollutants. 

Reasons To Install Carbon Water Purification Systems 

Unclean water has become a problem of huge magnitude. As per reports, millions of Americans might be drinking unsafe water. 

And most people are clueless about it. That’s because proper testing is needed to check the presence of certain chemical contaminants. 

The Environmental Protection Agency has set high decontamination standards. But many treatment plants fail to follow these. 

In fact, 20 percent of private wells are outside EPA regulation. And their contamination levels often exceed the set standards. 

You don’t want such toxic contaminants in your water supply. Do you? 

So it’s good to keep yourself safe from diseases by installing an undersink carbon water purification system. 

It’d provide you with the cleanest and best-tasting drinking water. 

Also, the water is free from chemicals. So you’re safe from any chemical side-effects while bathing, cooking, etc. 

Carbon water purification systems make your dull/dirty tap water pure and clean. 

You see, charcoal has been used for centuries to purify water. In fact, it has been used by ancient Egyptians and other civilizations as a water purification method.

Modern-day carbon water filters have been designed to purify water the same way as charcoal.  

As water passes through the carbon water purification systems, it gets purified. And its mineral properties get enhanced too. 

There are many more reasons that make carbon water purifiers a go-to filtration method. 

So let’s have a look at them in detail. 

#1. Carbon water purification systems offer natural decontamination 

Are you worried about chemical disinfectants present in your water? 

Your water supply may have high chemical contents. 

That’s because many decontamination methods include infusing chemicals like chlorine into the water. 

You get rid of water contaminants by using chemicals. However, you’re exposed to several health risks. 

So it makes sense to switch over to natural decontamination methods. And carbon water purification systems are one such natural solution. 

You may wonder how carbon water filters exactly purify water? 

You see, the carbon filters are highly porous. 

So a carbon water purifier absorbs water exactly like a sponge. And you get clean water just by passing it through the carbon filter. 

Carbon filtration removes heavy metal components like asbestos, lead, etc., from your water supply. Also, it cleanses chemical contaminants like pesticides, trihalomethanes, VOCs, etc. 

The best thing is carbon filters don’t need any chemicals to decontaminate water. 

Amazing, right?

Well, there’s more to it. 

An undersink carbon water purification effectively eliminates chemical disinfectants from your treated water supply. 

So your purified water need not have potentially harmful chemical traces. 

There you have it, a natural solution for water purification. 

#2. A carbon water purification system retains minerals

You see, water has certain naturally occurring minerals and salts like calcium, magnesium, iron, etc. And these minerals are essential for your health. 

For instance, natural minerals in the water ensure healthy skin, hair, strong bones, etc. Also, they ensure your body’s overall growth and development. 

Water purifiers ensure you drink safe water. However, many RO water purifiers also remove the natural minerals. 

That’s because the molecule size of these minerals is larger than that of water. So when water passes through the RO membrane, minerals like calcium, iron, potassium, etc., also get filtered out. 

That’s not the case with carbon water purifiers. 

Carbon water purification systems decontaminate water without removing these natural minerals. 

Carbon filters using activated charcoal efficiently purify your water. That keeps the nutrients that are already present instead of flushing them out. 

In fact, charcoal adds minerals like calcium, magnesium, and iron into the water. 

So pure water need not come at the cost of essential natural minerals. 

Awesome, isn’t it? 

#3 Carbon water purification systems are a low-cost solution 

A carbon water purifier offers you pure water on a budget. 

Take a traditional whole house water filtration system, for instance, which can cost an upward of $4200. 

That is a considerable upfront investment. 

Carbon water purification systems, on the other hand, offer similar benefits at a significantly lower cost. 

Depending on the size and quality, you can get a carbon water purifier between $50 and $500. 

In fact, carbon water purification systems are much cheaper than their counterparts in the market.  

For instance, you can expect to pay between $2700 and $3000 for an ozone purification system.

Similarly, popular ionization systems cost you between $1000 and $2000.

The difference is for you to see. 

#4. Easy maintenance with carbon water purification systems

Carbon water filters are extremely easy to maintain. Also, their maintenance is DIY friendly. 

So you don’t need to hire an expert to maintain your water purifier or replace its parts. 

You can do so by simply following manufacturer guidelines. 

In fact, carbon water purification systems need little to no maintenance. Replacing the carbon filter cartridge every 6 to 12 months is all you need to do.

And since the carbon filter cartridges are cheap, maintenance doesn’t cost you a fortune.

Sounds amazing, doesn’t it?

#5. Save the environment with carbon water purifiers

Bottled water has emerged as an easy solution to the unclean drinking water supply. 

But did you know that 38 billion plastic bottles end up in landfills across the US every year?

So bottled water isn’t a sustainable drinking water solution. Instead, they’re sure to cause great ecological damage. 

Carbon water purification systems can aid ecological conservation in a significant way. Since more carbon water filters mean lesser plastic bottle waste. 

And by installing one, you can reduce your plastic waste generation. 

Carbon Water Purification Systems: FAQs 

#1. Is it safe to drink water from a carbon filtration system?

Carbon water purification systems offer the safest and purest drinking water. 

In fact, carbon filtration techniques are time-tested.

Carbon filters use activated charcoal, absorbing all toxic contaminants. Also, the chemicals are filtered out in the process. 

So you get the highest quality water. 

Activated charcoal adds natural minerals to your water. That means you’re sure to have multiple health benefits as well. 

#2. What are granular activated carbon water purification systems?

Granular activated carbon or GAC water purification systems contain loose granules of carbon. 

These are used as a polishing filter in a whole house UV and filtering system. 

GAC filters are sure to improve the odor and taste of your water supply. 

That’s because they remove contaminants like VOCs, nitrates, pesticides, etc. Also, disinfectants like chlorine and chloramines are effectively filtered out. 

A whole house filtration system purifies water at the point of entry itself. And with granular activated carbon filters, you get better tasting water from each faucet of your home.

#3. What are carbon block filters?

A carbon block filter is one where loose pieces of carbon are compressed together to form a filter. 

Since these filters have compressed carbon, the water flow rate is usually low. 

Carbon block filters can filter out even minute or particle-sized contaminants from your water.

That’s exactly why these are known as one of the most effective water purification systems.

#4. How often should you change carbon filters?

Ideally, you should change the carbon filters or cartridges every six to twelve months. 

Carbon cartridges are the most vital components of your water purification system. They absorb all contaminants and chemical disinfectants when water is passed through them. 

These cartridges become ineffective after being used for a year.

So using them over a year means they’d no longer absorb pollutants. As a result, your water won’t be decontaminated. 

Worse, your water might be more contaminated than before. 

How?

You see, the pores of carbon filters are filled with absorbed contaminants. And over a period of time, these elements begin to break from the carbon filter and into your water supply. 

#5. Where should carbon water purification systems be used?

Carbon water purifiers have endless applications. 

You can install carbon water purification systems in many places. The most preferred one is at the ‘point of entry’ or POE. 

Carbon filtration at the ‘point of entry’ ensures whole house water purification. So you get pure water at every place, be it the kitchen, bathroom, garden faucet, etc. 

Undersink carbon water purification takes no additional space. Meaning you can be worry-free as it won’t take much space in your home. 

Also, you can fixate carbon water filters at the ‘point of use.’ That means you can have them at places where you need. 

For instance, you can install ‘point of use’ or POU carbon water purification systems. They will purify water at your drinking or cooking water faucets. 

Similarly, some showerheads include carbon filtration units. They prevent chlorine gas vapors when you shower. 

Such filtration systems are very cost-effective compared to whole house water purifiers. 

So you can choose between POE and POU carbon filters depending on your requirements and budget. 

Conclusion 

The problem of contaminated water is ever rising. And this is becoming commonplace in the US. 

People risk deadly diseases like cancer and tumors just by drinking contaminated water. 

Since most contaminants have no odor or taste, that makes the matter worse. 

Thankfully, carbon water purification systems are readily available as a budget-friendly solution. 

Carbon filters cost less than most other water purifier systems in the market. 

And the best thing is these are a natural alternative to chemically disinfected water.